Assessing green energy growth in Nepal with a hydropower-hydrogen integrated power grid model

The involvement of green hydrogen in energy transformation is getting global attention. This assessment examines the hydrogen production and its utilization potential in one of the hydropower-rich regions, Nepal under various demand growth and technology intervention scenarios by developing a power grid model of 52 nodes and 68 transmission lines operating at an hourly time-step. The model incorporates a grid-connected hydrogen storage system as well as charging stations for electric and hydrogen vehicles. The least-costly pathways for power grid expansion at the nodal and provincial levels are identified through optimization. The results show that 32 GW of installed capacity is required to meet domestic electricity demand and 14 GW more hydropower should be exploited to completely decarbonize the transport sector by 2050. For maintaining 50% shares of hydrogen vehicle in the transport sector and meet government electricity export targets, Nepal requires 5.7 GW, 12 GW and 23 GW of the additional electrolyzer, hydrogen storage tanks and storage-based hydropower capacities respectively. For a given electricity demand, introducing hydrogen systems can reduce the capacity requirements of hydro storage by storing surplus power generated from pondage run-of-the-river and run-of-the-river hydropower during the rainy season and using it in the dry season.     

肉类解冻工艺研究进展

解冻是肉类加工或烹饪前的重要步骤，不恰当的解冻工艺会导致肉类品质的劣变，因此，开发高效益的解冻工艺是十分必要的。解冻工艺的发展在经历了传统工艺、新型工艺后，近年又涌现了一些独特且具有创新性的解冻工艺。本文除简要概括肉品解冻过程及常见解冻工艺之外，综述这些独特的解冻工艺，介绍其开发思路、解冻原理和相关研究内容，并对未来解冻工艺的发展提出建议，旨在为肉及肉制品解冻工艺的选择和优化提供参考。     

基于软PLC的电气控制器设计

针对以传统PLC为核心设计的控制器存在的电路和控制方式复杂的问题,选用具有可靠性高、抗干扰能力强、易在线修改、易调试操作,具有CAN通信模块的新型软PLC作为电气控制器的控制核心,实现对外部信号的采集、转换、控制,达到了对系统精确控制的目的。实践表明,以软PLC为核心的电气控制器的成功应用,不仅提高了电气控制系统的稳定性和可靠性,且为其他控制系统提供了技术支持和应用依据。     

混砂设备中液位控制系统算法研究

在对国、内外混砂设备的控制特性进行调研和深入研究的基础上,对混砂设备的液位控制系统对象特性进行了分析,建立了相应的数学模型,并提出相应的控制方案,以模糊PID的复合控制方法来改进控制效果。根据室内和工业测试,该算法取得了预期效果。     

基于间接示功图测量的电潜柱塞泵故障诊断研究与应用

在分析电潜柱塞泵工作原理的基础上,结合柱塞式抽油泵的结构,建立了机组运行的理论示功图,对其进行了深入分析。以功率信号作为故障信息,提出一种基于间接示功图测量的电潜柱塞泵故障诊断方法,并描述了小波去噪方法绘制实测示功图的主要过程。针对机组典型故障,在室内模拟平台和现场油井上对该方法的准确性进行了验证实验与分析。测试结果表明:故障诊断效果较好。     

Microstructure and electrical conductivity of Mo/TiN composite powder for alkali metal thermal to electric converter electrodes

A Mo/TiN composite powder has been synthesized by a sol–gel method to improve the electrical performance and microstructural stability of the alkali metal thermal to electric converter electrode. The core (TiN)–shell (Mo) structure of the composite powder is confirmed by energy-dispersive X-ray spectroscopy and scanning electron microscopy. The composite powder is primarily composed of submicron (400–800 nm) particles that are coated on a core (>3–5 μm) particle. The Mo/TiN composite electrode exhibits high electrical conductivities of 1000 Scm⁻¹ at 300 °C and 260 Scm⁻¹ at 700  °C in an Ar atmosphere. The electrode exhibits excellent tolerance against grain growth during thermal cycling tests (R.T.↔800 °C), where the average growth rate of Mo grains in the Mo/TiN composite electrodes is controlled less than 0.5%/time (0.62→0.65 μm), while the growth rate in Mo electrodes is 306.7%/time (0.24→3.92 μm). It can be concluded that the Mo/TiN composite powder will suppress the degradation of the electrode and enhance the performance and durability of the unit cell at elevated temperatures.     

红枣多糖的高压脉冲电场高效提取及其在卷烟中的应用

采用UV-Vis分光光度法测定红枣中多糖含量,考察了红枣多糖的高压脉冲电场高效提取及工艺优化,并进行了卷烟加香试验。通过分析高压脉冲电场强度、温度、液料比、脉冲频率4个因素对多糖提取率的影响,在单因素试验结果的基础上,设计正交试验。试验结果表明：最佳测定条件为A2B3C2D2,即高压脉冲电场强度为20 kV/cm、固定高压脉冲电场温度为100℃、液料比为15∶1（体积/质量）、脉冲频率为10000 Hz。该方法快速、灵敏、准确,可用于红枣多糖的高效提取,最佳提取工艺条件下的提取率为3．01％。红枣多糖的卷烟加香试验表明,其能增加卷烟香气中的烤甜香韵,醇和烟气,改善口感。     

深海电机密封罩表面耐蚀防护

为提高深海电机密封罩的耐蚀性,采用电镀方法在其表面镀覆掺杂耐蚀纳米微粒的增强镍基复合薄膜。制定了电镀方案,剖析了其中涵盖的工艺要点,并考察了经镀膜防护处理的密封罩在模拟海水环境中的耐蚀性。结果表明:镀膜密封罩表现出较优的抑蚀阻蚀性能,表面腐蚀程度轻微。     

双电层电容器用中微双孔活性炭的研究进展

文章介绍了中微双孔活性炭的制备方法,综述了用作双电层电容器的最新应用研究,为中微双孔活性炭在双电层电容器中的应用提供参考。     

汽车涂装技术发展趋势及中国汽车涂装的对策

对汽车涂装面临的挑战、汽车涂装技术的发展趋势及最新进展进行了总结,概述了中国汽车涂装现状,并为促进汽车清洁涂装技术水平的提高提出了相应的对策。